Inmoov - Eyepixel

INMOOV - EYEPIXEL
=======================================
Made to give you're InMoov the touch he needs to express his inner emotions. I mean, why wouldn't you want adjustable glowing robot eyes after all right? :D

=======================================
- This design is made to fit the Inmoov - LifeCam EyeballSupport holes.
- Requires - x2 Neopixel ring - 8 bit
- No raft or support needed unless noted.
- Wiring - You will be running both neopixels from the same pin using a Y connection. As seen in the images, I added a larger piece of unheated heat shrink to slide over the wires to help adjust the wire slack.

=======================================
///Piece notes///
- Middle Base - Keeps the original InMoov eye look more or less. - Some light will hit the camera lens, but does not affect it enough to impact face tracking etc.

- Middle BaseLong - No light will hit the camera lens (IF PRINTED IN BLACK... white amplifies light hitting it), but you will lose a little