Inmotion V9 Stand – Modified 145mm Version

This model is a remix of the original stand by Mookie76.The original was designed for the Ninebot Z10 (175 mm). I modified it to fit the Inmotion V9 by reducing the base width and reinforcement from 175 mm to 145 mm.I also printed and tested the stand using PETG for extra durability and flexibility.Changes from the originalAdjusted bottom plate and reinforcement width: 145 mm (optimized for Inmotion V9).Stronger wall settings to increase load resistance.Tuned slicer settings for PETG on Bambu Lab P1S with 0.4 mm nozzle.Print Settings (tested with eSUN PETG+HS)Printer: Bambu Lab P1SNozzle: 0.4 mmLayer height: 0.20 mm (initial layer: 0.20 mm)Perimeters: 6 walls (≈ 2.5 mm thick)Top/Bottom layers: Top 5, Bottom 3Infill: 25% Grid (rectilinear solid infill)Line width: Outer wall 0.42 mm, Inner wall 0.45 mm, Top 0.42 mmSeam position: Aligned, Smart scarf seam enabledElephant foot compensation: 0.15 mmSpeedsOuter wall: 60 mm/sInner wall: 300 mm/sTop surface: 200 mm/sSparse infill: 270 mm/sInte