Bird Feeder

Easy to refill birdfeeder. Design Concept: Designed a simple feeder that does not make use of soda bottles for seed storage as these can be difficult to fill because of the narrow bottle neck. Print Settings: PETG/ABS/ASA 0.2mm layer, 3 walls, 15% infill Assembly: 1. Select the roof you prefer, tapered of flat. 2. Insert the tube through the hole in the roof and glue into place. Make sure the roof is oriented correctly before you glue it in place, refer to the pictures.Roof edge should point down to the trianglular holes in the tube.3. glue the Saucer into place. 4. Fit the cap and twine. Use a transparent filament for the tube to view the seed level if required.