Inosuke- LED Lightbox - NO AMS NEEDED

Inosuke LED Lightbox - Printing Instructions IncludedAll the necessary printing instructions are included in the file.If you have any questions, feel free to DM me!Assembly As shown in the photos above but also numbered on the STL FilesYou will need a 1mm thick glass layer or any transparent material of your choice. 195mm x 80mm x 1mmAlso, make sure to have a strip light of your choice for the lighting.For Support,Commercial Use & More: https://www.patreon.com/c/ACSPARK3DEnjoy showcasing your Inosuke lightbox!Note to always put the transparent layer lastRecommended to print the first black frame at 30m/m speedManufacturing settingsLightBox Frame Settings:Layer Height: 0.2Walls: 2Bottom: 2 (Or 3 to hide infill lines)Top: 215% InfillLightBox Back Plate Settings:Layer Height: 0.2Walls: 2Bottom: 3Top: 310% InfillLightBox Transparent Layer:Layer Height: 0.2Walls: 2Bottom: 2Top: 21% InfillDesign Layer Settings:Layer Height: 0.22 Walls2 Top/Bottom3% InfillNo supports MembershipFor Support <3B