Thingiverse
Insert for Reefs Beast 2000
di HumboldtEF
9
Download
5
Likes
0
Makes
This is an insert for the Reefs RC Beast 2000 servo that fills the excess space when mounting it with M3 screws keeping from being able to move around.
Its 3mm thick so you'll need slightly longer screws to mount the servo.
The only important setting is to use 4-6 perimeters or 100% infill for strength.
Use some big washers with the new screws to mount the servo unless they have a large washer head already.
Requires 2
Due to the tight fitting nature of this I cant guaranty this will work on all applications. It was designed for and fits perfect in the Axial SCX6 (with the provided 1/5 scale servo adapter)
This likely works on the Beast 1000 too, it should use the same case as the 2000.
Its 3mm thick so you'll need slightly longer screws to mount the servo.
The only important setting is to use 4-6 perimeters or 100% infill for strength.
Use some big washers with the new screws to mount the servo unless they have a large washer head already.
Requires 2
Due to the tight fitting nature of this I cant guaranty this will work on all applications. It was designed for and fits perfect in the Axial SCX6 (with the provided 1/5 scale servo adapter)
This likely works on the Beast 1000 too, it should use the same case as the 2000.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
