Thingiverse
Instrument Case Handle
door CompassDesignStudio
1
Downloads
8
Likes
0
Makes
My violin case needed a new handle, so I threw a design together really quickly.
You should be able to scale it a little for different case sizes. I included two pictures of some of the dimensions.
I printed mine at 50% infill and had to sand the inner sides a little - the inner distance was right at 95mm and was a tight fit on my case, so I'd suggest erring a *little* bit on the larger side if possible.
Angles are all 45° chamfers and the holes for screws are only 5mm, so you *should* be able to print without supports.
You should be able to scale it a little for different case sizes. I included two pictures of some of the dimensions.
I printed mine at 50% infill and had to sand the inner sides a little - the inner distance was right at 95mm and was a tight fit on my case, so I'd suggest erring a *little* bit on the larger side if possible.
Angles are all 45° chamfers and the holes for screws are only 5mm, so you *should* be able to print without supports.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!