Insulated A1 Mini Enclosure

Recycle your AMS waste and turn it into insulation! This enclosure designed specifically for the A1 Mini WITH AMS insulates the printer from outside elements leading to less warping and variability in temperature. This uses a ton of purged filament and support material as insulation in modular sections that can be stacked higher or lower depending on the height or setup of your printer. The files included are specific to the A1 Mini, but can be scaled to fit your printer if need be. Most of the pieces slot together with the exception of the front door and lid, which need to be glued and include holes for aligning utilizing short filament sections as pins. All parts can be printed on the A1 Mini, but to save time, if you have multiple printers, I've included X1C/A1/P1 series files as well. The stock PTFE tubing is a bit too short, so it will need to be extended in order to use this enclosure. Note that it is NOT manufacturer recommended to enclose the A1 series printers. You'll