Intel Kaby Lake delid tool

DescriptionThis is the Kaby Lake Version of my simple delid tool.Thanks to "Stullen Andi" for sharing the CPU dimension source :) This Version is BETA,I dont have a Kaby Lake CPU therefore it would be great if someone can print, test it and give feedback if it will fitThis tool should also work with Skylake/Devilcanyon/Haswell CPUs as Kaby only has two additional noses.* print both parts,* put some sort of rubber or foam on the inner bottom of the base.* put the CPU into the CPU-holder with the long PCB part looking over the end of the tray.* then put it in your vice and close it slowly carefully (giving the glue time to release).For enough strengh print at least with 3 perimeters and 30% infill !USE AT YOUR OWN RISK !!!* Only for CPUs who are glued and with thermal-paste, not for soldered CPU`s Donation: paypal.me/chriyoumagineMaterials and methodsSome sort of thin foam/rubberA vice. - do NOT use a screw clamp (c-clamp) or a hammer !a 3D printer that can print very exact, the dimensio