Intex Corner Joint

So our Intex pool "gave in" this summer (maybe I was a bit rough on it...), and spares were nowhere to be had.

So I designed my own, with additional reinforcement, to be printed in PETG.

Vertical tube diameter: 32 mm
Horizontal tube diameter: 38 mm

Included are both the corner joint and pins.

Print upside down on the big flat surface.

Filament: 1.75 mm PETG (alternatively ABS)
Layer Height: 0.2 mm
Wall Line Count: 4
Top Layers: 4
Bottom Layers: 6 (the flat surface that will be facing up on the finished print)
Infill: 30%
Printing Temperature: 245 C
Build Plate Temperature: 75 C
Print Speed: 60 mm/s
Initial Layer Speed: 10 mm/s
Fan Speed: 50%
Brim: Yes