invisible wardrobe coat rack

Reuse Your Printer Mounting Screws! Ever wondered what to do with the mounting screws from your printer? - This design gives them a second life. Use them to assemble your new coat rack.For assembly, you’ll need two of these screws! or use screws with a diameter of 2.5-3mm, length of 35mm and a head diameter with max 5.5mm and a lenth of 3.5mm. VariantsThere are two versions available so you can choose the one that fits your setup and style:Wide H2D version with 6 hooksSlim A-/X-/P-Series version with 4 hooksPrintable PartsThe coat rack consists of five printable components:1. base2. left corner piece3. right corner piece4. front cover5. screw plug Assembly1. Mounting the BaseThe base includes the hooks for hanging your clothes.1. Place a wall plug (anchor) in the center of your desired mounting position.2. Screw in a countersunk screw (maximum head diameter 9.5 mm) deep enough so the base can slide tightly onto it from above.3. Align the base horizontally (using a level is recommended)