iPad Stand (BERGENES)

Update 2020-12-29: Added IKEA stand v2. Easier to print, removed 10mm slot, replaced with 14mm.

I'm teaching myself Fusion 360, so I try to recreate things I have IRL. I cut out the center to save print time and filaments, and it'll work just fine with low infill. Printed mine at 5% infill, and 2 shells.

The [IKEA BERGENES](https://www.ikea.com/gb/en/p/bergenes-holder-for-mobile-phone-tablet-bamboo-10457999/) style need _build plate only support_ unless your overhang game is on-point. I'd rather print a bit of support and use highest possible layer height for your nozzle to speed up the print time. About 40min each at 0.4mm layer height, and 5% infill.