Thingiverse
iPhone 11 Mudhorn Case
door GhostOneX
0
Downloads
0
Likes
0
Makes
This is a case for the iPhone 11 only.
There is a "test" piece that can help with making sure your pieces will line up with printing and whether the two materials/colors you use would imbed correctly.
Printed the mudhorn using PLA and the case itself in TPU.
Found out the hard way that not all TPU are the same. Tried some from NovaMaker and the mudhorn PLA and TPU case would not imbed correctly. Tried different mudhorn heights, etc and every time I tried to remove the case the PLA and TPU would just pull apart.
Don't get me wrong, the NovaMaker TPU is ok for printing single color parts but can't imbed another material in it.
Used ZIRO TPU and was able to imbed the mudhorn into the case using a sigil of only 0.2 mm in height.
Remember to use z-hop of at least 0.4 mm to clear the mudhorn when printing the case.
I am not suggesting which filament brands to use and I have not tried TPU on TPU so that may work better as well.
There is a "test" piece that can help with making sure your pieces will line up with printing and whether the two materials/colors you use would imbed correctly.
Printed the mudhorn using PLA and the case itself in TPU.
Found out the hard way that not all TPU are the same. Tried some from NovaMaker and the mudhorn PLA and TPU case would not imbed correctly. Tried different mudhorn heights, etc and every time I tried to remove the case the PLA and TPU would just pull apart.
Don't get me wrong, the NovaMaker TPU is ok for printing single color parts but can't imbed another material in it.
Used ZIRO TPU and was able to imbed the mudhorn into the case using a sigil of only 0.2 mm in height.
Remember to use z-hop of at least 0.4 mm to clear the mudhorn when printing the case.
I am not suggesting which filament brands to use and I have not tried TPU on TPU so that may work better as well.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
