iPhone 17 Pro Key Chain – 3D printable model from MakerWorld

MakerWorld

Other Miniatures

iPhone 17 Pro Key Chain

by Levi · Other Miniatures

200 Downloads

51 Likes

120 Makes

Go to Model

This is a very nice accessory for your keys. It is 6cm long and 3cm wide. You can print it multicolor with only a few changes. I recommend 0.16mm layer height for better details. It would be great if you could leave a comment and a picture of your print! Thank you so much!I hope you enjoy the model ;) Please also take a look at my other models: https://makerworld.com/en/@erpivel Boost MeIf you enjoy my designs, consider Boosting to support me. Thank you so much!

iPhone iphone 17 pro keychain iphone 17 iphone 17 pro key chain key handy phone key ring key ring accessory key ring attachment keyring

Category

Other Miniatures

Source

MakerWorld

Published

02.02.2026

Updated

10.05.2026

What you need to print this: Intermediate

Why?

supports needed · 2 colors · 0.16mm layers

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Colors

2 (AMS/MMU recommended)

Layer height

0.16 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for iPhone 17 Pro Key Chain?

Any FDM printer should handle iPhone 17 Pro Key Chain just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does iPhone 17 Pro Key Chain need supports when printing?

Yes, iPhone 17 Pro Key Chain will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

Is iPhone 17 Pro Key Chain beginner-friendly?

iPhone 17 Pro Key Chain is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.

What file format is iPhone 17 Pro Key Chain available in?

iPhone 17 Pro Key Chain is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is iPhone 17 Pro Key Chain free to download?

Yes, iPhone 17 Pro Key Chain is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL