Iron solo leveling

Do not modify the heigt of this model Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 141.5x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.1mm and the Actual Depth is 2.1mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Sky Blue Transmission Distance: 8.2 PLA BambuLab Basic Jade White Transmission Distance: 8 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Sky Blue At layer #18 (1.52mm) swap to Jade White for the rest.