ISDT SC608 Panel Mount Adapters

Adapters for mounting a ISDT SC608 charger to a panel/deck. The design is made for a 5mm thick deck, to give a nice flush transition between the charger and top of the deck, with 1mm thick 3M VHB tape attaching the charger to them. Simply adjust the length of the standoffs to accommodate different deck thicknesses.

The pattern to be put in a deck is shown in one of the attached pictures. In essence, the cutout is 90x59mm, and the holes are 11mm from the sides and 6mm from the top/bottom. As well as a 25x10mm cutout for the wheel.

Holes in the standoffs are 2.7mm, which allows a M3 bolt to thread in nicely.