Isolation Chips (3 Variations)

For Culturing Microbes Printer Used: Ultimaker 2+ Connect Material Used: RS PRO - PLA 2.85mm (Any PLA should be fine) Nozzle Used: 0.4mm Print Settings: Layer Height = 0.06 - 0.08mm Infill Density = 20 - 30% Build Plate Adhesion Type = Brim To assemble 1 I-Chip you need: - 6 x (M2 x 16mm Screws) - 6 x (M2 Hex Nut) - 4 x (Membrane filters Type: Circle, Pore size: 0,03 µm, Size: 25mm) For Assembly: Refer to JPG file