Isolation Enclosure Polymaker Polydryer

Isolation Enclosure for Polymaker Polydryer A shell to clamp around the body, holding insulation-material in place, so the filament drier is more efficient and can be used at colder outside temperatures. Test printed with pla - holds up fine but recommend PETG-CF for temp. resistance along with a ceramic fiber mat for insulation. I used 5mm self threading screws to hold the shells together, along with a industrial hinge and clamp. Uploaded “closed” files, where you can place holes for your furniture wherever you need to.=> with the added weight of the insulation and enclosure it is enough to just lay the top on actually. assembly: (now updated with pictures) See pic 1 for lid assembly, just clamp the original lid in between the 2 shells and snap in the humidity sensor.For the bottom, place the ptfe tube adapter in the big bottom print (pic2), and snap the original see through lower over it.When threading a 10mm ptfe fitting in from the outside, the tube adapter will slide into the pree