Itachi BookMark

This model was my early work so the model is Thick



Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


The Model is 112.11x200mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.28mm and the Actual Thickness is 3.28mm



Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to White
At layer #31 (2.56mm) swap to Red for the rest.



Setting



Layer height: 0.08

Initial Layer height: 0.16

Wall: 2

Sparse infill density: 100%

Sparse infill pattern: Rectilinear

Turn Off Prime Tower