Itachi Uchiha Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Jade White At layer #21 (1.76mm) swap to Charcoal At layer #22 (1.84mm) swap to Red for the rest.