ITX PC cube case with sfx PSU

The case is 5.4 liters. It's shaped like a cube because it can easily be printed on basically any printer   COMPATIBILITY: Mini ITX motherboard Single slot low profile PCIE card 70 mm CPU cooler clearance (Arctic passive & AMD Wraith Spire will fit) SFX and SFX-L PSU 2.5" ssd under where the PSU cable exits (When using a SFX PSU)   EXTRA MATERIAL NEEDED: x14 (min x12)* m3 brass heat insert. The hole I designed is 4.25mm in diameter x4 standard 6mm motherboard standoff x4 PSU screw x4 Motherboard screw x8-10* m3 screw for the front and back panel *the back panel has 6 screw hole but 2 are extra   All parts can be printed with basically no bridging. Just orient the parts in the right way There's a square hole to fit a keyboard switch so it can be used as a power button   The motherboard IO plate is a separate file. Cut the hole for your motherboard. (Stock IO plate is not supported because it require extra space on the top)   There's also a blank side panel file. You can carve your own design.