Thingiverse
iVac Pro Blast Gate Mount
von d2324913
17
Downloads
14
Likes
0
Makes
# iVac Pro Blast Gate Mount
> A two-piece mounting solution to affix your iVac Pro Blast Gate to the wall
## Requirements:
- Mounting bracket (STL included)
- Mounting lower foot (STL included)
- (2) 1 1/2" or longer construction screws or drywall anchors to affix mount to wall
- (3) M6 x 25mm screws (M4 and M5 will also work; longer than 25mm is okay)
- (3) M6 washers
- (3) M6 nuts
## Usage:
- Print the mounting bracket and mounting lower foot. I printed mine in PETG, but PET is fine too.
- Using 2 screws, mount the upper bracket to the wall as shown in the picture. Screwing into a stud is best, but drywall anchors will also work.
- Using an M6 screw, washer, and nut, attach the mounting foot to the Blast Gate at the corner closest to the power supply port.
- Using the remaining sets of hardware, attach the end of the blast gate with the lettering to the mount.
- Attach your hoses, the power adapter, and GET SUCKING
> A two-piece mounting solution to affix your iVac Pro Blast Gate to the wall
## Requirements:
- Mounting bracket (STL included)
- Mounting lower foot (STL included)
- (2) 1 1/2" or longer construction screws or drywall anchors to affix mount to wall
- (3) M6 x 25mm screws (M4 and M5 will also work; longer than 25mm is okay)
- (3) M6 washers
- (3) M6 nuts
## Usage:
- Print the mounting bracket and mounting lower foot. I printed mine in PETG, but PET is fine too.
- Using 2 screws, mount the upper bracket to the wall as shown in the picture. Screwing into a stud is best, but drywall anchors will also work.
- Using an M6 screw, washer, and nut, attach the mounting foot to the Blast Gate at the corner closest to the power supply port.
- Using the remaining sets of hardware, attach the end of the blast gate with the lettering to the mount.
- Attach your hoses, the power adapter, and GET SUCKING
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
