MakerWorld

Office

Ivar side container

by Mylou · Office

8 Downloads

3 Likes

8 Makes

I needed a small bin for the clothing pins I use for my towel. Roughly 90x45x45 mm. I recommend printing this with support.

Category

Office

Source

MakerWorld

Published

14.03.2026

Updated

14.05.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

90 mm (Medium)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Ivar side container?

Any FDM printer should handle Ivar side container just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 90 mm is recommended.

Does Ivar side container need supports when printing?

Yes, Ivar side container will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Ivar side container available in?

Ivar side container is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Ivar side container free to download?

Yes, Ivar side container is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Ivar side container

Similar Models

Add to Collection