Iwo Jima Colored Flag

this is my rendition of raising the flag at Iwo Jima with the blue and the red of the American flag clearly shining through without colorizing the whole image. If you plan on resizing it, please make sure to only change the X and Y. Actual print in the cover photo. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mm #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 5 unique filamentsSwap Instructions: Start with Dark Blue At layer #11 (0.96mm) swap to Red At layer #14 (1.2mm) swap to Charcoal At layer #15 (1.28mm) swap to Beig