Thingiverse

Jack stand for RC car

by lavik17

20 Downloads

10 Likes

0 Makes

The holder part is customized to fit the front/backside of the Tarmo4 RC car. If you would like to design another holder, then just make the shaft 10x10 mm, with 5mm holes placed 10mm apart.

Printing:

Jack - Use supports
Holder - I printed it lying down, with supports

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

10 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Jack stand for RC car?

Any FDM printer should handle Jack stand for RC car just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 10 mm is recommended.

Does Jack stand for RC car need supports when printing?

Yes, Jack stand for RC car will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Jack stand for RC car available in?

Jack stand for RC car is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Jack stand for RC car free to download?

Yes, Jack stand for RC car is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Jack stand for RC car

Add to Collection