JAYO Bambu Lab AMS Cardboard Spool Adapter Ring

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles. Description: This model widens one side of the spool ring adapter to stabilize a JAYO 1.1kg 194x59mm cardboard spool while it rotates within a Bambu Lab AMS. Features:ReusableJAYO nameplate for easy identification when reusingInstructions:Print one of each model for a single spool.Affix the wide spool ring adapter on the right-hand side of the JAYO spool if you're facing the AMS.See attached photos.Considerations:Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should n