Jellyfish Bookmark - HueForge

I've got 2 profiles for this bookmark. There is a thinner 1.5mm thick bookmark and also a 2mm thick bookmark. The 2mm one has black added as the first layer which makes it thinner but also emphasizes the shadows. However, the 2mm one is a bit thick depending on the book you're reading! Thinner 1.5mm Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 0.5 PLA 3D Fillies Purple Transmission Distance: 2.4 PLA Bambu Magenta Transmission Distance: 3.4 PLA InkStation White Transmission Distance: 7Swap Instructions: Start with Dark Blue At layer #5 (0.48mm) swap to Purple At layer #7 (0.64mm) swap to Magenta At layer #11 (0.96mm) swap to White for the rest. Thicker 2mm Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Overture Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 0.5 PLA 3D Fillies Purple