Jinx Cutout - Hueforge

Jinx from the Arcane series. I ended up making 2 version. Thick version has a cutout for an 8mm x 2mm magnet to go in the back. 1 small magnet was enough to hold mine up but if you need more or space for a bigger magnet you can modify the Magnet Cutout from the Object tab. If you scale it up, only increase the X and Y or it might come out the top of the image.Thin version was mostly just for testing the colours but it would be good if you wanted to glue it to something. It's thin enough that light will go through parts of it.For mounting to the wall, I made a small wall mount clip found in my profile. Magnetic Wall Mount Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 70x124.73mm in size #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 2.5 #ec008c PLA BambuLab Magenta Transmission Distance: 2.8 #00ffff PLA Elegoo Sky Blue Transmission Distance: 3.2 This print uses 4 unique filaments