Jinx

This is a thin print meant for a picture frame! Boost MeThank you for the support! Please post pictures of your variations love to see what you all come up with!Project: JinxPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.55mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Magenta Transmission Distance: 4.5 PLA BambuLab White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #13 (1.12mm) swap to Magenta At layer #20 (1.68mm) swap to White for the rest.