John Wick HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 200x200mm in size.You may print at higher layer heights below the Min Depth of 0.24mm.The Max Depth is 2mm and the Actual Depth is 1.9mm. Swap Instructions: Start with Black At layer #6 (0.56mm) swap to White At layer #8 (0.72mm) swap to Orange At layer #16 (1.36mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest.