Join the Empire Hue Forge

Join the Empire Hueforge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 246x138.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 4mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Latte Brown Transmission Distance: 2 Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Dark Red At layer #10 (0.88mm) swap to Latte Brown for the rest.