Cults3D
Art
Zum Modell
Jointed Astronaut
0
Downloads
2
Likes
0
Makes
This is astronaut model that requires manual assembly, capable of limited articulation after assembly.
-------------
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~5 hours
Recommended to use PETG for printing.
If the joints are too loose or too tight, please adjust the X-Y contour compensation by approximately ±0.05
-------------
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~5 hours
Recommended to use PETG for printing.
If the joints are too loose or too tight, please adjust the X-Y contour compensation by approximately ±0.05
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
