Jointed Triceratops

This is a Triceratops model consisting of 9 parts, capable of limited articulation after assembly.

The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the dimensions are inaccurate and the X-Y contour compensation value needs to be adjusted by -0.05 to -0.1. A test file is included, and it is recommended to print it first.

-------------
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~9 hours