JRR TOLKIEN HUEFORGE

After making a few HueForge prints of characters I decided to do one of the great man himself JRR Tolkien.This will take pride of place on my bookshelf with the many copies of his works I own. Project: TOLKIEN.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.4mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #6 (0.56mm) swap to Blue Gray At layer #11 (0.96mm) swap to Ash Gray At layer #13 (1.12mm) swap to White for the rest.