Thingiverse
JT ER2 Horizontal Fixed Feed
von cedwards
16
Downloads
19
Likes
0
Makes
Horizontal fixed feed tube for JT ER2 paintball gun
- Use the feedneck cutter template to saw off the stock feed tube at an angle and drill a mounting hole (3/16" drill bit).
- Print the thing. Try at a 45 degree angle with raft and supports. (see picture for reference)
- The feed is designed to use a sock-lock feedgate
- the front of the feed snaps into the hole you drilled on the feedneck, and you need a bolt and nut to attach the rear to the gun's beavertail
- Use the feedneck cutter template to saw off the stock feed tube at an angle and drill a mounting hole (3/16" drill bit).
- Print the thing. Try at a 45 degree angle with raft and supports. (see picture for reference)
- The feed is designed to use a sock-lock feedgate
- the front of the feed snaps into the hole you drilled on the feedneck, and you need a bolt and nut to attach the rear to the gun's beavertail
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
