Thingiverse
JTS-air
di JoanTheSpark
68
Download
68
Likes
0
Makes
mini ITX/DTX case (from sheet metal - needs lasercutting and bending)
* dual slot PCIe GPU (full height, half length 180mm long)
* effective aircooling by 2x 120mm
* no optical drive
* no 3.5" drive
* SFX PSU
* as small as possible (some airgap for GPU/PSU though)
* mini ITX or DTX motherboards
* as many 2.5" drives as possible
* modified Silverstone USB I/O and a 19mm dia pushbutton are expected for case finish (you can do without/run your own though, if you take the correct files)
* final dimensions: 310H x 149W x 240D (w/o feet)
* dual slot PCIe GPU (full height, half length 180mm long)
* effective aircooling by 2x 120mm
* no optical drive
* no 3.5" drive
* SFX PSU
* as small as possible (some airgap for GPU/PSU though)
* mini ITX or DTX motherboards
* as many 2.5" drives as possible
* modified Silverstone USB I/O and a 19mm dia pushbutton are expected for case finish (you can do without/run your own though, if you take the correct files)
* final dimensions: 310H x 149W x 240D (w/o feet)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
