Jujutsu Kaisen

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail vennez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x211.11mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #2255cc PLA forshape blue Transmission Distance: 4.9 #ffffff PLA Deeplee White Transmission Distance: 4.7 #5c3b03 PLA deeplee pro brown Transmission Distance: 5 #d70610 PLA Forshape+ Red Transmission Distance: 3.6 #f7e735 PLA Forshape+ Yellow Transmission Distance: 7.1 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 7 unique filaments Instructions de changements: Commencer par Black At layer #10 (0.88mm) swap to blue At layer #12 (1.04mm) swap to White At layer #13 (1.12mm) swap to brown At layer #15 (1.28mm) swap to Red At layer #18 (1.52mm) swap to White At laye