Junkers Celsius (etc) side covers

Covers closing the side openings in the Junkers boiler casing. Mounted with magnets (easy to remove) 6x2.5mm (or 6x3 too)There are many places for magnets, 3 were enough for me to stick to the housing very well. At the back of the holes for the magnets there are small holes - to be filled with some glue - but (for me) it was enough to push the magnet into the hole with pliers, it holds itself without the help of glueI attach two versions - one "normal" with the same size as the metal casing of the boiler (i.e. - the insert is up to the wall), and a slightly shorter version which you can see in the pictures - I have tiles on the wall, so the insert is 6mm shorterPrinted on BambuLab from PETg white, with PLA as support interface - everything is setup in .3mf files.