Jurassic world - It all started here - hueforge

Hueforge of Jurassic world - It all started hereThe photos shows the result in 126.32x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 126.32x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.44mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique fila