Jyn Erso Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Jyn Erso Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.1mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 PLA PolyLite Steel Grey Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 4 unique filaments ***attached .3mf file prints the first 5 layers at 0.2mm then the rest at 0.04mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #28 (1.24mm) swap to Blue Gray At layer #35 (1.52mm) swap to Steel Grey At layer