Jynx Hueforge

Project: JynxPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to BambuLab Green At layer #9 (0.8mm) swap to Orange At layer #13 (1.12mm) swap to Yellow for the rest.