K2 PLUS CFS HOLDER

DO NOT DISCARD THE 4 SCREWS THAT SECURE THE CFS DURING SHIPPING AS THEY WILL BE REUSED. (You can still use M4 screws if the original ones are unavailable.)Hardware:2x M3x16 screws4x original CFS packing screws (or M4 screws possibly)Print Instructions:BOTH PARTS FIT ON ONE PLATEDO NOT PRINT IN PLA (The printer heats up significantly when heating the chamber.)Recommended material: ABSMinimum: 3 walls, 25% infillUse supports for optimal resultsAssembly:Remove the 2 top screws from the back panel of the K2 Plus.Using the 4 screws from the CFS packaging, hand-tighten the printed parts to the bottom of the CFS.Align the back of the CFS with the back panel holes and tighten the M3 screws.Secure the 4 screws holding the CFS.