Thingiverse

K40 Water Cooling Mount

von AndreasG4r

3 Downloads

2 Likes

0 Makes

This is a mount for a water cooling system. The pump is a 22W 800L/H china pump with a small water reservoir. To cool the laser a bigger container or a chiller must be connected in series. The whole mount is screwed with two screws from the inside to the side of the K40.
My experience: Don't use chiller! The temperature can't be cooled enough. (I used 4x 120mm fans). The biggest problem is bimetal corrosion. Especially when you cut only a view times a month.
I empty the whole system after usage. Do you have recommendations for me, how to solve the corrosion problem during longer storage periods?

k40 K40 Laser lasercut lasercutter laser cut laser K40 mount water water cooling water pump k40 K40 Laser lasercut lasercutter laser cut laser K40 mount water water cooling water pump

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat