Thingiverse
K7XX mic attachment v2
door feletoch
8
Downloads
8
Likes
0
Makes
A newer version of the mic arm addon for my AKG K7XX with my Sony ECMCS3 mic from my previous model:
https://www.thingiverse.com/thing:2481074
This one is heavier but the mic is removable with the cables so I can take them off anytime and use the headphone independently.
_______________________________________________________________________
Like the V1, this will scratch the plastic on the K7XX where the attachment clips on.
This version contains 2 version, the friction fit and the one with gears.
Both requires:
- 1x M2 12mm
- 1x M3 12mm
- Nuts are optional for the gear version, 1x M2 nuts for the friction version
- Gear version requires extra M2 12mm and friction version require a M2 8mm
I would recommend some lock tight for the side swivel joints and some cable sleeves
Print it hotter for stronger parts. This should work with K702, K701 or similar style headphones. Wire can be route in the slots, I used blu tack and sewing thread to held it in place, loop the mic wi
https://www.thingiverse.com/thing:2481074
This one is heavier but the mic is removable with the cables so I can take them off anytime and use the headphone independently.
_______________________________________________________________________
Like the V1, this will scratch the plastic on the K7XX where the attachment clips on.
This version contains 2 version, the friction fit and the one with gears.
Both requires:
- 1x M2 12mm
- 1x M3 12mm
- Nuts are optional for the gear version, 1x M2 nuts for the friction version
- Gear version requires extra M2 12mm and friction version require a M2 8mm
I would recommend some lock tight for the side swivel joints and some cable sleeves
Print it hotter for stronger parts. This should work with K702, K701 or similar style headphones. Wire can be route in the slots, I used blu tack and sewing thread to held it in place, loop the mic wi
feletoch publiceert ook op
34 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!