K8403 LED clips

Within a week after mounting the K8403 LED option of the Velleman Vertex K8400 the double sided tape started to detach and the LED strips were falling down. I decided to make some clips in 3D Builder and print them. First step was to make 8 clips with a 45 degrees angle (as seen by another design somewhere). These were OK for the left and right side but for the front and back side they were to low preventing the X movements. I made substitutes for the front side and back side with 90 degrees (downwards) light direction. Take care that the one at the back/right side is moved as far as possible to the right since otherwise it collides with the print-head when this moves to the home position. Print with 50% infill to make the clips rigid. Note that the clips still require the metal clamps to which the double sided adhesive tape was to be attached. Without these clamps the LED strips will probably fall out.