Thingiverse

Kabuflex R40 Cable Entry

by Octoate

11 Downloads

8 Likes

0 Makes

Designed for two Kabuflex R40 pipes that I have placed in the earth from my house to the garage. The cable entry shall protect the two pipes from water and dust and is the point where the cables enter the garage.
With my printer settings (see below) it took me about 13 hours to print this design. If you want to print it, rotate the design by 180 degrees and enable support for the screw mounts.

Printing:

I used white PETG, no supports, 30% infill, 0.2mm with my Creality CR6SE.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG

Est. print time

13 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Octoate also publishes on

13 additional models across 1 more platforms

Printables

13 models

♥ 83 ↓ 607 ⚒ 2

Frequently Asked Questions

Does Kabuflex R40 Cable Entry need supports when printing?

No supports needed for Kabuflex R40 Cable Entry — it's designed to print clean off the bed.

How long does it take to print Kabuflex R40 Cable Entry?

According to the design notes, Kabuflex R40 Cable Entry takes approximately 13 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Kabuflex R40 Cable Entry available in?

Kabuflex R40 Cable Entry is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Kabuflex R40 Cable Entry free to download?

Yes, Kabuflex R40 Cable Entry is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Kabuflex R40 Cable Entry

Similar Models

Add to Collection