Kakashi Hatake

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.67x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Dark Brown Transmission Distance: 2PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5PLA Prusament Lipstick Red Transmission Distance: 3.3This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Dark BrownAt layer #9 (0.8mm) swap to BeigeAt layer #10 (0.88mm) swap to Jade WhiteAt layer #16 (1.36mm) swap to BlackAt layer #19 (1.6mm) swap to Lipstick RedAt layer #23 (1.92mm) swap to Beige for the rest.