Thingiverse
Kayak cup holder
par Dgalgon27
60
Téléchargements
44
Likes
0
Makes
Track-mounted cup holder for kayaks. Printed with PLA. Fits plastic bottles and cans perfectly. It can use a 1/4-20 bolt or a yak attack bolt to attach to your kayak. All part links may not be the best place to get the parts, Many can be found at your local hardware store.
Post Processing:
The 3 brass inserts should be set into the plastic base with a soldering iron. Then it's a matter of assembling the rest. The spacer goes in the hole after the washer and gets sandwiched between the washer and the cup.
Parts Needed:
3 4x6x6 Brass Inserts https://www.mcmaster.com/94459A160/
3 4X6 Flat Head Screws https://www.mcmaster.com/92010A216/
1 1/4-20 Nut https://www.mcmaster.com/95462A029/
1 1/4-20 x 1in Bolt (For Unitrack mount) https://www.mcmaster.com/91268A503/
or
1 1/4-20 x 1in T-bolt https://www.amazon.com/dp/B01FZYE15K?ref_=cm_sw_r_cp_ud_dp_VM3TAZ9KH4YKCJNY53CX
Post Processing:
The 3 brass inserts should be set into the plastic base with a soldering iron. Then it's a matter of assembling the rest. The spacer goes in the hole after the washer and gets sandwiched between the washer and the cup.
Parts Needed:
3 4x6x6 Brass Inserts https://www.mcmaster.com/94459A160/
3 4X6 Flat Head Screws https://www.mcmaster.com/92010A216/
1 1/4-20 Nut https://www.mcmaster.com/95462A029/
1 1/4-20 x 1in Bolt (For Unitrack mount) https://www.mcmaster.com/91268A503/
or
1 1/4-20 x 1in T-bolt https://www.amazon.com/dp/B01FZYE15K?ref_=cm_sw_r_cp_ud_dp_VM3TAZ9KH4YKCJNY53CX
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !