Thingiverse

KEEPCOOL

by Charlie1982

3k Downloads

2.6k Likes

5 Makes

Go to Model

KEEPCOOL
---------------------
Description
How to use ABC:
Step A) Pull out the cork
Step B) Filling the water
Step C) Put in the Freezer make frozen

What can do:
A) Speed up drink be cold.
Put drink into frozen KEEPCOOL and put them in Refrigerator can speed up drink to cold.

B) Maintain cold drink under Ambient temperature
Put cold drink into frozen KEEPCOOL can Maintain keep it cool.

C) Refrigerator Deodorizing
Put Lemon peel into KEEPCOOL and put them in Refrigerator can Deodorizing.

Available in three sizes to select -
------------
Can accommodate canned drinks to red wine bottles

Hang holder can easy to hang on your belt or other

Build by any type of 3D print no Additional support need.

Has been printed "tall" by MakerBot Replicator 2 use PLA material, layer high 0.25mm 50%infill took 16 hrs.
It works very well.
--
When you going to print this, layer high 0.15~0.25mm should be fine raft is better t

123D artproject coke cool creation daily use DesignProject drink engineeringproject Ice IceBoxChallenge Keep keeper MakerEdChallenge meshmixer refrigerator steam stem technology TVY vase water wine 123D artproject coke cool creation daily use DesignProject drink engineeringproject Ice IceBoxChallenge Keep keeper MakerEdChallenge meshmixer refrigerator steam stem technology TVY vase water wine 123D artproject coke cool creation daily use DesignProject drink engineeringproject Ice IceBoxChallenge Keep keeper MakerEdChallenge meshmixer refrigerator steam stem technology TVY

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, Polycarbonate

Min. bed size

200 mm (Large)

Est. print time

16 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for KEEPCOOL?

Any FDM printer should handle KEEPCOOL just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print KEEPCOOL?

According to the design notes, KEEPCOOL takes approximately 16 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is KEEPCOOL available in?

KEEPCOOL is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is KEEPCOOL free to download?

Yes, KEEPCOOL is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

KEEPCOOL

Similar Models

Add to Collection