Thingiverse
Kerfmaker Ultimate for Table Saw (Tenonmaker)
di zeropage
1.3k
Download
621
Likes
6
Makes
This is a kerf maker. A tool that is usually used with a table saw to simplify the process of cutting kerfs into wood. Especially helpful, if you want to repeatedly cut kerfs of the same size.
There are a quit a few kerf-makers available here on Thingiverse. Most of them have a similar design and while one maker refers to "the real McCoy" as being the source of inspiration, I found a commercially available one as KM-1 or KM-2 from Bridge City.
Though these designs are sleek and cleverly constructed, I saw - admittedly a pretty tiny - room for improvement: After the first cut you have to turn the kerfmaker bei 180°, then do the second and subsequent cuts → I chose a design that utilizes a big/long handle which makes it very easy to grab and turn the kerfmaker.
__What you need__
• all five parts printed
• 1 x M6 threaded bar, 57 mm length
• 1 x M6 threaded bar, 33 mm length
• 2 x M6 nut
• 1 x M6 self-locking hex nut
If you want to make bigger kerfs print the "EXTRA WIDE"
There are a quit a few kerf-makers available here on Thingiverse. Most of them have a similar design and while one maker refers to "the real McCoy" as being the source of inspiration, I found a commercially available one as KM-1 or KM-2 from Bridge City.
Though these designs are sleek and cleverly constructed, I saw - admittedly a pretty tiny - room for improvement: After the first cut you have to turn the kerfmaker bei 180°, then do the second and subsequent cuts → I chose a design that utilizes a big/long handle which makes it very easy to grab and turn the kerfmaker.
__What you need__
• all five parts printed
• 1 x M6 threaded bar, 57 mm length
• 1 x M6 threaded bar, 33 mm length
• 2 x M6 nut
• 1 x M6 self-locking hex nut
If you want to make bigger kerfs print the "EXTRA WIDE"
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
