Thingiverse
Kevins Top 1D
door DorffMeister
2
Downloads
4
Likes
0
Makes
Hey look I designed a top. Ive printed a few of other designs from Thingiverse and I thought I'd take a stab at designing a few. I'm not terribly good at spinning them, but I've had it spin over 2 minutes. I imagine it could go longer.
A "plug" the size of the holes in the top is provided and could be printed. My initial thought was that the "plug" might be used to help align during glueing or to just for look, but I didn't use these and don't feel they are actually useful. If you do print plugs, you probably want to print with a brim.
The model comes whole. I DON'T RECOMMEND printing with supports. Instead, use your slicer (or another tool) to cut the model in half, print both halves, and used CA glue to glue the two parts together. To better understand, see the screen capture I've included in the images.
Video of the top in action: https://youtu.be/TdGSWcp1z0M
A "plug" the size of the holes in the top is provided and could be printed. My initial thought was that the "plug" might be used to help align during glueing or to just for look, but I didn't use these and don't feel they are actually useful. If you do print plugs, you probably want to print with a brim.
The model comes whole. I DON'T RECOMMEND printing with supports. Instead, use your slicer (or another tool) to cut the model in half, print both halves, and used CA glue to glue the two parts together. To better understand, see the screen capture I've included in the images.
Video of the top in action: https://youtu.be/TdGSWcp1z0M
DorffMeister publiceert ook op
71 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
